Maintaining Microclimates during Nanoliter Chemical Dispensations Using Custom-Designed Source Plate Lids (Ed.) In: 2015. @article{noKey,
title = {Maintaining Microclimates during Nanoliter Chemical Dispensations Using Custom-Designed Source Plate Lids},
url = {https://journals.sagepub.com/doi/full/10.1177/2211068215616072},
doi = {https://doi.org/10.1177/2211068215616072},
year = {2015},
date = {2015-01-01},
abstract = {A method is described for using custom snap-on lids to protect chemicals in microtiter plates from evaporation and contamination. The lids contain apertures (diameter 1.5, 1.0, or 0.5 mm) through which the chemical building blocks can be transferred. The lid with 0.5 mm apertures was tested using a noncontact acoustic liquid handler; the 1.0 and 1.5 mm lids were tested using two tip-based liquid handlers. All of the lids reduced the rate at which solvents evaporated to room air, and greatly reduced the rate of contamination by water and oxygen from room air. In steady-state measurements, the lids reduced the rate of evaporation of methanol, 1-hexene, and water by 33% to 248%. In cycled experiments, the contamination of aqueous solvent with oxygen was reduced below detectability and the rate at which DMSO engorged atmospheric water was reduced by 81%. Our results demonstrate that the lids preserve the integrity of air-sensitive reagents during the time needed for different types of liquid handlers to perform dispensations. Controlling degradation and evaporation of chemical building blocks exposed to the atmosphere is increasingly useful as the reagent volume is reduced by advances in liquid handling technology, such as acoustic droplet ejection.},
keywords = {TEMPEST},
pubstate = {published},
tppubtype = {article}
}
A method is described for using custom snap-on lids to protect chemicals in microtiter plates from evaporation and contamination. The lids contain apertures (diameter 1.5, 1.0, or 0.5 mm) through which the chemical building blocks can be transferred. The lid with 0.5 mm apertures was tested using a noncontact acoustic liquid handler; the 1.0 and 1.5 mm lids were tested using two tip-based liquid handlers. All of the lids reduced the rate at which solvents evaporated to room air, and greatly reduced the rate of contamination by water and oxygen from room air. In steady-state measurements, the lids reduced the rate of evaporation of methanol, 1-hexene, and water by 33% to 248%. In cycled experiments, the contamination of aqueous solvent with oxygen was reduced below detectability and the rate at which DMSO engorged atmospheric water was reduced by 81%. Our results demonstrate that the lids preserve the integrity of air-sensitive reagents during the time needed for different types of liquid handlers to perform dispensations. Controlling degradation and evaporation of chemical building blocks exposed to the atmosphere is increasingly useful as the reagent volume is reduced by advances in liquid handling technology, such as acoustic droplet ejection. |
Organophosphorus Inhibition and Characterization of Recombinant Guinea Pig Acetylcholinesterase (Ed.) In: 2015. @article{noKey,
title = {Organophosphorus Inhibition and Characterization of Recombinant Guinea Pig Acetylcholinesterase},
url = {https://www.eurekaselect.com/133538/article},
doi = {https://doi.org/10.2174/0929866522666150728114754},
year = {2015},
date = {2015-01-01},
abstract = {Organophosphorus (OP) pesticides and nerve agents have been designed to inhibit the hydrolysis of the neurotransmitter acetylcholine by covalently binding to the active site serine of acetylcholinesterase while Alzheimer drugs and prophylactics, such as tacrine, are characterized by reversible binding. Historically, the guinea pig has been believed to be the best non-primate model for OP toxicology and medical countermeasure development because, similarly to humans, guinea pigs have low amounts of circulating OP metabolizing carboxylesterase. To explore the hypothesis that guinea pigs are the appropriate responder species for OP toxicology and medical countermeasure development, guinea pig acetylcholinesterase (gpAChE) was cloned into pENTR/D-TOPO, recombined into pT-Rex-DEST30 and expressed in Human Embryonic Kidney 293 cells. Recombinant gpAChE was purified to a specific activity of 800 U/mg using size exclusion and immobilized nickel affinity chromatography, with purity confirmed by gel electrophoresis. Ellman’s assay was used to enzymatically characterize gpAChE, identifying a KM of 154±18.7 µmol L-1 and a kcat of 4.79x104±5.26x102 /sec. Apparent gpAChE IC50’s for diisopropylfluorophosphate, dicrotophos, paraoxon, and an Alzheimer’s drug, tacrine, were found to be 10.1±1.98, 337±108, 1.02±0.29 and 0.30±0.01 µmol L-1, respectively. Apparent gpAChE inhibition constants for diisopropylfluorophosphate, dicrotophos, paraoxon, and tacrine were found to be 8.40±0.60, 4.50±0.30, 0.29±0.01 and 0.42±0.07 µmol L-1, respectively. Lineweaver-Burk plots confirmed tacrine as a mixed inhibitor and paraoxon, dicrotophos and diisopropylfluorophosphate as irreversible non-competitive inhibitors. gpAChE bimolecular rate constants for diisopropylfluorophosphate, dicrotophos and paraoxon were found to be 1.44±0.33x104, 1.56±0.12x103 and 4.57± 0.23x105 L µmol-1 min-1, respectively. Although the blood levels of OP metabolizing carboxylesterases in the guinea pig are similar to the low levels in human blood, the gpAChE is different in its enzymology. Therefore, medical countermeasures against OP intoxication should be tested for efficacy with the recombinant form of gpAChE prior to initiating animal studies.},
keywords = {TEMPEST},
pubstate = {published},
tppubtype = {article}
}
Organophosphorus (OP) pesticides and nerve agents have been designed to inhibit the hydrolysis of the neurotransmitter acetylcholine by covalently binding to the active site serine of acetylcholinesterase while Alzheimer drugs and prophylactics, such as tacrine, are characterized by reversible binding. Historically, the guinea pig has been believed to be the best non-primate model for OP toxicology and medical countermeasure development because, similarly to humans, guinea pigs have low amounts of circulating OP metabolizing carboxylesterase. To explore the hypothesis that guinea pigs are the appropriate responder species for OP toxicology and medical countermeasure development, guinea pig acetylcholinesterase (gpAChE) was cloned into pENTR/D-TOPO, recombined into pT-Rex-DEST30 and expressed in Human Embryonic Kidney 293 cells. Recombinant gpAChE was purified to a specific activity of 800 U/mg using size exclusion and immobilized nickel affinity chromatography, with purity confirmed by gel electrophoresis. Ellman’s assay was used to enzymatically characterize gpAChE, identifying a KM of 154±18.7 µmol L-1 and a kcat of 4.79x104±5.26x102 /sec. Apparent gpAChE IC50’s for diisopropylfluorophosphate, dicrotophos, paraoxon, and an Alzheimer’s drug, tacrine, were found to be 10.1±1.98, 337±108, 1.02±0.29 and 0.30±0.01 µmol L-1, respectively. Apparent gpAChE inhibition constants for diisopropylfluorophosphate, dicrotophos, paraoxon, and tacrine were found to be 8.40±0.60, 4.50±0.30, 0.29±0.01 and 0.42±0.07 µmol L-1, respectively. Lineweaver-Burk plots confirmed tacrine as a mixed inhibitor and paraoxon, dicrotophos and diisopropylfluorophosphate as irreversible non-competitive inhibitors. gpAChE bimolecular rate constants for diisopropylfluorophosphate, dicrotophos and paraoxon were found to be 1.44±0.33x104, 1.56±0.12x103 and 4.57± 0.23x105 L µmol-1 min-1, respectively. Although the blood levels of OP metabolizing carboxylesterases in the guinea pig are similar to the low levels in human blood, the gpAChE is different in its enzymology. Therefore, medical countermeasures against OP intoxication should be tested for efficacy with the recombinant form of gpAChE prior to initiating animal studies. |
Automated Assembly of Standard Biological Parts (Ed.) In: 2011. @article{noKey,
title = {Automated Assembly of Standard Biological Parts},
url = {https://www.sciencedirect.com/science/article/abs/pii/B9780123851208000164?via%3Dihub},
doi = {https://doi.org/10.1016/B978-0-12-385120-8.00016-4},
year = {2011},
date = {2011-01-01},
abstract = {The primary bottleneck in synthetic biology research today is the construction of physical DNAs, a process that is often expensive, time-consuming, and riddled with cloning difficulties associated with the uniqueness of each DNA sequence. We have developed a series of biological and computational tools that lower existing barriers to automation and scaling to enable affordable, fast, and accurate construction of large DNA sets. Here we provide detailed protocols for high-throughput, automated assembly of BglBrick standard biological parts using iterative 2ab reactions. We have implemented these protocols on a minimal hardware platform consisting of a Biomek 3000 liquid handling robot, a benchtop centrifuge and a plate thermocycler, with additional support from a software tool called AssemblyManager. This methodology enables parallel assembly of several hundred large error-free DNAs with a 96+% success rate.},
keywords = {TEMPEST},
pubstate = {published},
tppubtype = {article}
}
The primary bottleneck in synthetic biology research today is the construction of physical DNAs, a process that is often expensive, time-consuming, and riddled with cloning difficulties associated with the uniqueness of each DNA sequence. We have developed a series of biological and computational tools that lower existing barriers to automation and scaling to enable affordable, fast, and accurate construction of large DNA sets. Here we provide detailed protocols for high-throughput, automated assembly of BglBrick standard biological parts using iterative 2ab reactions. We have implemented these protocols on a minimal hardware platform consisting of a Biomek 3000 liquid handling robot, a benchtop centrifuge and a plate thermocycler, with additional support from a software tool called AssemblyManager. This methodology enables parallel assembly of several hundred large error-free DNAs with a 96+% success rate. |