About the Webinar
Feeding, seeding, and passaging cells by hand takes hours at the hood, and seeding densities vary from one person to the next. Every manual step also puts sensitive cultures and sterility at risk. The latest Reagent Exchanger (RX) takes these steps off your hands without taking them out of your biosafety cabinet. The RX is compact enough to fit inside biosafety cabinets and laminar flow hoods. Feeding, seeding, and washing stay in the sterile workspace where your cells already are.
A single protocol can add trypsin, quench, wash buffer, and fresh media in sequence, with no bottle swaps. The RX can connect to up to six reagents, each on its own fluid line, so nothing is shared between them. You can also dispense different volumes to different columns of the same plate. For seeding, a stirred reservoir keeps cells in suspension so every well gets the same cell density.
Gentle handling protects loosely adherent cells. The RX offers angled nozzles for non-contact, side-wall dispensing, with programmable aspiration rate and height. In HEK-293T media exchanges, the RX cut confluency loss by half compared with manual feeding (4.9% vs 10.1%). Built-in cleaning stations clean the nozzles between steps to prevent cross-contamination. In our testing, two fluorescent iPSC lines cultured in the same 96-well plate showed none.
Join Danny Yang, RX Product Manager, to see how these updates carry into everyday cell culture and assay workflows, from feeding spheroid cultures to processing 96-well Transwell plates without removing inserts.
When
Session 1
10:00 AM - 10:30 AM CET
(09:00 AM - 09:30 AM GMT)
Session 2
01:00 PM - 01:30 PM ET
(10:00 AM - 10:30 AM PT)
Why Attend?
- Keep cell culture inside the hood: See how the compact RX fits in biosafety cabinets and laminar flow hoods, so automated feeding, seeding, and washing never leave the sterile workspace.
- Protect sensitive and loosely adherent cells: Learn how side-wall dispensing and tunable aspiration limited HEK-293T confluency loss to 4.9 ± 1.5%, versus 10.1 ± 2.7% with manual feeding, and how the same control applies to spheroid cultures and 96-well Transwell plates.
- Seed more uniform plates: See how a stirred reagent reservoir keeps cells in suspension, holding mean well-to-well CV below 10% across seven 96-well plates.
- Run multi-reagent workflows in one protocol: Learn how up to six dedicated dispense lines support trypsin dissociation with quench and plate rocking, plate coating, immunostaining, and ELISA wash steps, without swapping bottles.
- Lower contamination risk: See how built-in cleaning stations, up to two plumbed-in cleaning liquids, and dedicated lines kept two iPSC lines in one plate free of detectable cross-contamination.
- Spend less time on setup and upkeep: See cartridge-based pump tubing for quicker changes, a gripper-based delidder for automatic lid handling, and tip-free, self-cleaning nozzles, with a full 96-well media exchange in under one minute.
- Get your questions answered: Submit questions during the session on labware, cleaning, and integration with Cellmatic or third-party robotic arms; any not covered live will be answered by email.
Who Should Attend?
Cell biologists, stem cell and organoid researchers, assay scientists, lab managers, and automation engineers in pharma, biotech, and academic labs who regularly handle media exchange, cell washing, cell plating, enzymatic dissociation, Transwell permeability assays, plate coating, immunostaining, or ELISA wash steps.
Especially relevant if you work with loosely adherent cells, run cell culture inside a biosafety cabinet, or are evaluating your first automated plate washer. No prior plate washer experience is needed.
About the Speaker
Danny Yang is the Product Manager for the Reagent Exchanger at Formulatrix, where he has driven cell culture and lab automation initiatives since 2021. With a background in mechanical engineering and molecular serotyping, Danny oversees engineering R&D as well as instrument and consumables production. He bridges scientific needs and engineering design by collaborating closely with cross-functional teams in sales, marketing, and customer support.